Elevators

 

The conveyor sides are manufactured from low friction polyethylene and the belts can be supplied in a range of plastic materials. There is also a choice of colours.  Belt flights can be added in a range of types and sizes to suit your requirements.
 
The modular linked belt runs in a groove precisely machined in the elevator side frames.  This keeps the belt under control and prevents side movement. Belt widths, horizontal lengths and inclined lengths are infinitely variable.
 
 
  elevator

Standard Elevator

  • Modular linked belt
  • Solid plastic machined side frames
  • Various lengths available
  • Range of belt widths
  • Belts in Acetyl, polypropylene and polyethylene
  • Flights 25mm, 50 and 76mm high
  • Monex anodised aluminium frame
  • Jacking feet or locking casters

 

 

Download pdf catalogue
  elevator

Swan Neck Elevator

  • Range of belt materials and colours
  • Easy Change Belts
  • Plastic or stainless steel pins

 

 

 
  elevator

Motor Drive

  • 230v Single phase or 415 three phase Variable Speed
  • Integral controller
  • Overload protection
  • Choice of makes

 

 
  elevator

Straight Section

  • Various lengths & widths available
  • Variable speed
  • Integral controller
 
  elevator

Hopper

  • Hoppers designed to suit your components
  • Manufactures in stainless steel
  • Can be lined to protect components
 
  elevator

Special Chutes

  • Special discharge chutes are available
  • Manufactured in stainless steel

 

Back
  elevator

Steel Elevator M2303

  • Modular linked belt
  • Belt width 200
  • Discharge heights 0.7 to 6M
  • Support frame 40mm square with tee slots
  • Drive rollers 50mm diameter
  • Powder coated finish or all stainless steel
  • Motor 230v 50W or 415/3/50 50W
  • Thermal overload protection & Continuous rating
  • B class insulation & terminal box IP54
  • Belt speeds from 0.6 to 15 M/min
  • FDA approved belts available
  • Flight heights from 6mm to 50mm
  • Flight spacing from 12mm

 

 
  elevator

Bulk Storage Hopper M2403

  • Large bulk storage capacity, up to one cubic meter
  • Used with our M2300 elevators
  • Gentle on components
  • Uses our highly successful M1950 conveyor
  • Standard belt width 200mm - others available
  • Low noise operation
  • Rollers 50mm diameter
  • Powder coated finish or stainless steel
  • Motor 230v or 415v, 3 phase, 50hz
  • B class insulation & terminal box to Ip54
  • Belt speeds 0.5 to 7M/min
  • Variable speed
  • Range of special textured or flighted belts
  • FDA approved belt option
 
  elevator

Stainless Steel Elevator M2304

  • Modular plastic FDA approved link belt
  • Many flight types available
  • Flight heights from 6mm to 100mm
  • Flight spacing from 50mm
  • Belt width 300mm
  • Discharge heights 2 to 6M
  • Drive rollers 100mm diameter
  • Modular design based on M19100 conveyors
  • Stainless steel hopper & elevator
  • Choice of stainless steel or anodised extrusion frame
  • Motor 230v or 415/3/50
  • Thermal overload protection
  • B class insulation & terminal box IP54
  • Belt speeds from 0.6 to 15 M/min