Belt Conveyors

  • Belt Conveyor With 50mm Rollers Type M1950 Belt Conveyor With 50mm Rollers Type M1950 Compact and robust. Used in a wide range of industries
  • Belt Conveyor With 50mm Rollers Type M1950 Belt Conveyor With 50mm Rollers Type M1950 Showing fixed stainless steel side guides
  • Belt Conveyor With 100mm Rollers Type M19100 Belt Conveyor With 100mm Rollers Type M19100 Used as moving shelves in stores. Sensors control the queue of bags of components and keep them apart
  • Multi-Lane Belt Conveyor Type M19100 Multi-Lane Belt Conveyor Type M19100 Used for conveying a number of lines of components
  • Special Belt Conveyors Special Belt Conveyors Many special configurations are available to suit special components
  • Conveyor With Drip-tray Conveyor With Drip-tray Used for machined components. Flights on the belt separate components and drip tray collects cutting oil.
  • Fully Adjustable Side Guides Fully Adjustable Side Guides Can be adjusted for both width and height

  Download pdf catalogue

Hover to pause

 

belt conveyor

Click image to enlarge

Our belt conveyors have a very narrow profile and are suitable for use in production lines where space is limited.  Our standard conveyors are made from standard modules and are quick and simple to construct, are safe and have a low noise level.  They have T-slots on both sides for installing guide rails, sensors, etc.  There is also a choice of different drive units.
  • Lengths: 1 to 5m
  • Belt Widths: 40mm, 80mm, 100mm, 200mm, 300mm, 400mm & 600mm.
  • Speed Ranges: 0.13 to 53m/min
  • Drive Roller Diameters 50mm and 63mm
  • Idler roller diameter 50mm
  • Fixed side guides 20mm or 35mm high
  • Adjustable side guides - optional
  belt conveyor

The Compact Conveyor

  • Compact narrow cross section
  • Crowned rollers for accurate belt tracking
  • Easy belt tensioning & tracking
  • 50mm idler rollers
  • Under guarding - optional
Side Guides  
  belt conveyor

Fixed Integral Side Guides

  • Standard stainless steel side guides
  • Integral part of the bed plate
  • Increases the stiffness of the bed plate
  • Heights: 20 and 40mm

 

 

 

belt conveyorClick image to zoom

Adjustable Side Guides

  • Aluminium extrusion
  • Replaceable plastic wear strip
  • Adjustable for height and width
  • Can be bent to form a lead in

 

Belt Types  
  belts

Belts

  1. Silon - low grip - flock surface - ideal for delicate parts
  2. Black PVC heavy duty course grip belt - ideal for inclines
  3. Black ribbed urethane high grip belt - ideal for inclines
  4. Blue urethane food quality belt
  5. White urethane food quality belt
  6. Green smooth PVC general use belt
  7. Black smooth urethane general use belt
Drives  
  belt conveyor

Center Drive M1950-CD

  • Large drive roller diameter of 63mm
  • Can be moved to any position along the conveyor
  • Belt has a large rap around of 255 degrees
  • Integral thermal overload trip
  • End Roller Diameters: 50mm
  • Speed Ranges: 0.13 to 53m/min
  belt conveyor

End Drive M1950-ED

  • Drive and idler roller 50mm diameter
  • Can be used with belt flights and attachments
  • Belt Widths: 80 to 600mm
  • Lengths: 1m - 5m
  • Speed Ranges: 1.4 to 42m/min*
  belt conveyor

Heavy Duty Quick Change Drive

  • Motors are very reliable but may need to be changed
  • This motor can be changed with the minimum of down time
  • Ideal for use in long production lines
  • Choice of SEW or Motorvario geared motors
Controls  
  belt conveyor controls

Controls

  • Inverter motor speed controller
  • Adjustable ramped acceleration & deceleration
  • Frequency indicator
  • Simple fault finding codes
  • Easy to install and program
  • limited number of parameters for an AC drive
  • Also available in the IP65 (NEMA 4) version
  • Ratings up to 2.2 kW.
  • Supply either 220v, 110v single phase or 3 phase 220v and 400v
  • Comes complete with built-in class A EMI filter

 

Belt Flights  
  belt conveyor

Belt Flights

  • Belt flights can be welded to the belt
  • Ideal for separating products
  • Can be used for collating groups of products
  • Many different profiles and sizes available
  • Used on inclined conveyors and elevators

 

  belt conveyor

In line Flights

  • In line flights can be welded to the belt
  • Separates the belt into lanes
  • Can be used to keep components separate
  • Many different profiles and sizes available

 

Special Conveyors  
  belt conveyor

Drip Trays

  • Oil, cutting fluid etc. can be saved and returned to a tank
  • Used on the outlet of components from machining centers

 

 

 

  belt conveyor

Integral Belt Edges

  • Used where very small components could get under the belt
  • Also used to keep a liquid on the belt
  belt conveyor bend

Belt Bend

  • Inner radius 200mm to 1200mm
  • Outer radius 600mm to 2200mm
  • Stainless steel main frame
  • Turning angle 90 or 180 degrees (other angles - phone)
  • Belt Widths: 300mm, 400mm & 600mm.
  • Speed Range 1.4 to 20m/min
  • Load up to 10kg/sqm
  • Food standards FDA/USDA
  spirol conveyor

Spiral Conveyor

  • Belt width 308mm
  • Inside belt radius 500mm
  • Outside belt radius 808mm
  • Maximum speed 35m/min
  • Stainless steel frame
  • Temperature range 0-60 degrees C
  • Modular setup
  • No lubrication needed
  • Choice of belt types